Directions:

1. Wash the car and dry,(for the old car,  suggested to use our product of iron powder remover
which can remover the oxidization and the iron powder);

2. Apply liquid compound to car body, removing the scratch, and wash with water;

3. Spray grease removal agent on the car body, and use soft fibre cloth to wipe the grease,
and wash with low-pressure water and dry ;

3.Apply the harden crystal Wax on the sponge, and spread evenly on the car paint with area
of 40cm*40cm vertically and horizontally, the time should be controled with 1~5mintes under
20℃ to 40℃, 5~15 minutes under 5℃~20℃, longer if under 5℃ or above 0℃, then wipe with
soft fibre cloth to clean the crystal marks,

4.After 2 hours staying in the plant , the car can be in use.

After use this product, the car can be protected for one year!


Cautions:
1.Operating in dust-free plant under 40 degree;
2.Do not operate under direct strong sunshine;
3.Do the coating by several areas;
4.Better to use the gloss repairing liquid quarterly.